NOVATIKAutomotive Care Tools Request spec sheet

Home / Model range

Twelve models. One battery family.

Every figure below comes from our production sheets, not from a supplier's promotional PDF. Where a model has two gears, both are listed. If you need a variant that is not here — different cup size, longer nozzle, another battery — ask; the tooling is in the same building.

Production range

Full specification table

Model	Type	Motor	Power	Suction	Speed	Cup	Battery	Runtime	Weight
NT6067	Car vacuum · metal	BLDC	120 W	20 kPa	50–73k rpm	105 ml	3 × 2500 mAh	15–35 min	513 g
NT6042	Handheld	BLDC	110 W	18 kPa	61–75k rpm	300 ml	3 × 2500 mAh	15–25 min	420 g
NT6054A	Handheld · large cup	BLDC	120 W	12 / 15 kPa	74–76k rpm	500 ml	3 × 2500 mAh	25 / 15 min	550 g
NT6065	2-in-1 blow & suction	BLDC	120 W	20 kPa	55–76k rpm	95 ml	3 × 2500 mAh	15–35 min	435 g
NT6057A	2-in-1 · Qi base	BLDC	120 W	18 kPa	51–71k rpm	93 ml	3 × 2500 mAh	11–35 min	492 g
NT6063	Handheld · 200 ml	BLDC	70 W	16 kPa	47–65k rpm	200 ml	2 × 2000 mAh	15–34 min	375 g
NT6064	Mini 2-in-1	Brushed	110 W	9 kPa	41–61k rpm	95 ml	3 × 2000 mAh	15–25 min	475 g
NT6050	Safety hammer	Brushed	115 W	8.8 kPa	65k rpm	100 ml	3 × 2500 mAh	20 min	500 g
NT6045A	Blow & suction	Brushed	65 W	4.3 kPa	39k rpm	100 ml	2 × 2500 mAh	20 min	322 g
NT6045	Night-light	Brushed	65 W	4.3 kPa	39k rpm	100 ml	2 × 2000 mAh	20 min	322 g
NT6033	USB mini	Brushed	85 W	4.1 kPa	32k rpm	90 ml	2 × 2500 mAh	15 min	465 g
NT6027	USB mini · entry	Brushed	50 W	2 kPa	32k rpm	90 ml	2 × 2000 mAh	20 min	356 g
NT6051B	Corded 12 V	Brushed	110 W	7 kPa	40k rpm	200 ml	5 m cable	continuous	590 g

Swipe the table sideways to see battery, runtime and weight.

Runtime is measured at room temperature from full charge to cut-off, at the gear stated. Suction is a nozzle measurement at full charge. Battery packs are 18650-based with protection board; charger input 5 V / 2 A unless specified for the destination market.

Line 1 — vacuums

Three bodies cover most enquiries

A metal-body flagship, a large-cup model for detailing shops, and a 200 ml mid-range unit that lands cheaply at retail.

BLDC car vacuum · metal body

NT6067

20 kPa120 W513 g

The model most importers start with: all-metal housing that survives a trunk in summer, 73,000 rpm peak and the full nozzle kit in the box — including an inflation nozzle, so one tool covers cleaning and top-ups.

Suction: 20 kPa
Speed: 50–73k rpm
Cup: 105 ml
Battery: 2500 mAh ×3
Runtime: 15–35 min
Charge: ≈3.5 h
Size: 214×57×211 mm
Net weight: 513 g

In the box: 2-in-1 suction nozzle · pet nozzle · extension tube · 2-in-1 blowing nozzle · inflation nozzle · charging cable · manual.

Handheld vacuum · 300 ml cup

NT6042

300 ml18 kPa420 g

For markets where the vacuum is used on more than a footwell — pet hair in the back seat, sand after the beach. The 300 ml cup means fewer stops, and 420 g keeps it usable one-handed.

Suction: 18 kPa
Speed: 61–75k rpm
Cup: 300 ml
Battery: 2500 mAh ×3
Runtime: 15–25 min
Charge: ≈4 h
Size: φ67 × 430 mm
Net weight: 420 g

In the box: long suction nozzle · brush nozzle · extension tube · blanket nozzle · blowing nozzle · storage bag · small brush · cable · manual.

Handheld vacuum · large cup, two gears

NT6054A

500 ml2 gears76k rpm

The detailing-shop unit: 500 ml cup, a low gear for upholstery and a high gear for mats. Heaviest of the three at 550 g — the trade for the cup and the airflow.

Suction: 12 / 15 kPa
Speed: 74–76k rpm
Cup: 500 ml
Battery: 2500 mAh ×3
Runtime: 25 / 15 min
Charge: ≈4 h
Size: φ82 × 395 mm
Net weight: 550 g

In the box: crevice nozzle · brush nozzle · extension tube · charging cable · manual.

Line 2 — blow & suction

One motor, two directions

Same body, a nozzle on each end: suck the footwell, blow the AC vents, the keyboard, the beach sand off a child seat.

2-in-1 blow & suction · BLDC

NT6065

20 kPaBlow 78 g435 g

The model that answers the "does it also inflate an air mattress" question. Blowing weight of 78 g handles inflatables, vents and dust in corners; eight accessories in the box make it a retail-ready kit.

Suction: 20 kPa
Blow force: ≈78 g
Cup: 95 ml
Battery: 2500 mAh ×3
Runtime: 15–35 min
Charge: ≈3.5 h
Size: φ57.5 × 282 mm
Net weight: 435 g

In the box: long nozzle · brush nozzle · extension tube · blanket nozzle · blowing nozzle · storage bag · small brush · cable · manual.

2-in-1 with wireless charging base

NT6057A

Qi base18 kPa492 g

Sits on a base in the boot and charges without a cable — a strong shelf-differentiator for retail and e-commerce listings. Comes with mattress and swim-ring nozzles, so it is not just a car tool.

Suction: 18 kPa
Speed: 51–71k rpm
Cup: 93 ml
Battery: 2500 mAh ×3
Runtime: 11–35 min
Charge: ≈5 h
Size: φ57.5 × 270 mm
Net weight: 492 g

In the box: 2-in-1 nozzle · sofa nozzle · rechargeable storage base · mattress nozzle · dust-blowing nozzle · swim-ring nozzle · cable · manual.

Safety hammer + vacuum

NT6050

Escape tool115 W500 g

A regional product, not a global one: window-breaker tip plus a vacuum. Sells where buyers expect an emergency tool in the door pocket — Gulf states, parts of Asia, ride-hailing fleets.

Suction: 8.8 kPa
Speed: 65,000 rpm
Cup: 100 ml
Battery: 2500 mAh ×3
Runtime: 20 min
Charge: ≈5 h
Size: φ60 × 295 mm
Net weight: 500 g

Note: hammer function is mechanical; specify the glass type it will be sold against when ordering.

Line 3 — inflation

Cordless tire inflators
on the same battery

Digital preset pressure, auto stop, and a battery pack shared with the vacuum range — one charger in the car instead of two. Full specification sheet available on request while the line is being finalised for release.

Preset

Set the pressure, walk away

Auto stop at the target value; no gauge-watching at the valve.

Shared

One battery family

The same 2500 mAh pack and charger as the vacuum range, so kits stay simple.

Private

Your brand, your packaging

Housing colour, logo, language on the display and the carton are yours.

Request the inflator specification

Need a model that is not on this page?

Different cup size, longer nozzle, another plug standard, a battery pack for a hotter climate — most changes start in our own tool shop.

Send the requirement